For years I ran a BCM Gunfighter Mod 3 (Long Latch) Charging Handle on my 5.56 M&P 15.  That gun is now gone and I researched and could find no contraindications to running the 7.62 Mod 3 on my M&P 10 until the package showed up and it's the only place I ever saw that said M&P 10's are a no-go.  I'm seeing conflicting info on the Radian Raptor Ambi CH.  Some sources say yes it fits others say no it doesn't.  Now Ambi is not a requirement but a long latch is due to my serious lack of feeling and dexterity in my left hand. 

Does the collective power of knowledge and information that LF is know of any Long Latch or Ambi CH's that will fit and function in my M&P10?  My BCM CH is up for sale in the HESM if anyone is interested (essentially BNIB).

Thanks in advance for any info or leads on something that will work for me.

Mojo/Mark
__________________________
Yo homey, is that my briefcase...?
Vincent from "Collateral"
__________________________
You want the good life, you break your back, you snap your fingers, you snap your neck... Prong/Demon Hunter
__________________________

Because...I Can. 


Joined: 9/30/09
Location: Northern Nevada (Reno/Sparks)

Original Post

I have an entire machine shop at my disposal.  I can get one of the guys on the manual Bridgeport mills to get it done. They’ve done other work for me before.  

Thanks for the info, brother. It is much appreciated.  

Mojo/Mark
__________________________
Yo homey, is that my briefcase...?
Vincent from "Collateral"
__________________________
You want the good life, you break your back, you snap your fingers, you snap your neck... Prong/Demon Hunter
__________________________

Because...I Can. 


Joined: 9/30/09
Location: Northern Nevada (Reno/Sparks)

MOJONIXON posted:

I can get one of the guys on the manual Bridgeport mills to get it done. 

Is there really any other kind of mill that a guy Really  wants to run?

------------------------------------- "A True Warrior knows neither Left or Right"  Looking for a doc who can fix my allergies.. Stupid People and IED's...

David Reeves posted:
MOJONIXON posted:

I can get one of the guys on the manual Bridgeport mills to get it done. 

Is there really any other kind of mill that a guy Really  wants to run?

No.  I remember hearing about Bridgeport’s from my dad way back in the late 60’s early 70’s.  Being a machinist is how he put himself thru Berkeley and got his business degree.  Probably the last true conservative to graduate from there and that was the mid to late 50’s.  

Mojo/Mark
__________________________
Yo homey, is that my briefcase...?
Vincent from "Collateral"
__________________________
You want the good life, you break your back, you snap your fingers, you snap your neck... Prong/Demon Hunter
__________________________

Because...I Can. 


Joined: 9/30/09
Location: Northern Nevada (Reno/Sparks)

GNX posted:

Geissele makes one for 7.62 guns. I have it on my old school AR10TC.

I will be looking in to that.  Thanks.  

Mojo/Mark
__________________________
Yo homey, is that my briefcase...?
Vincent from "Collateral"
__________________________
You want the good life, you break your back, you snap your fingers, you snap your neck... Prong/Demon Hunter
__________________________

Because...I Can. 


Joined: 9/30/09
Location: Northern Nevada (Reno/Sparks)

The Extractor posted:



(edited to correct the photo)  Dorsai

Got my machine time to do this mod scheduled for tomorrow at 0600.

Mojo/Mark
__________________________
Yo homey, is that my briefcase...?
Vincent from "Collateral"
__________________________
You want the good life, you break your back, you snap your fingers, you snap your neck... Prong/Demon Hunter
__________________________

Because...I Can. 


Joined: 9/30/09
Location: Northern Nevada (Reno/Sparks)

BCM  charging handle modification complete.  Will put it in after work  today to check function. Set up time and machine time 10 minutes total. Cost $10 for a good 6 pack of beer.

handle

Mojo/Mark
__________________________
Yo homey, is that my briefcase...?
Vincent from "Collateral"
__________________________
You want the good life, you break your back, you snap your fingers, you snap your neck... Prong/Demon Hunter
__________________________

Because...I Can. 


Joined: 9/30/09
Location: Northern Nevada (Reno/Sparks)

Attachments

Photos (1)

Dry run through with my dummy rounds. 4 X 5 cycles of 5 rounds each cycle. Not a definitive test but all rounds cycled without issue.  I hopefully get to live fire test it this weekend. 

Once  again thanks to @ THE EXTRACTOR for telling me about this mod. 

Mojo/Mark
__________________________
Yo homey, is that my briefcase...?
Vincent from "Collateral"
__________________________
You want the good life, you break your back, you snap your fingers, you snap your neck... Prong/Demon Hunter
__________________________

Because...I Can. 


Joined: 9/30/09
Location: Northern Nevada (Reno/Sparks)

Add Reply

Post
Copyright Lightfighter Tactical Forum 2002-2019
×
×
×
×
×