REQUEST:

Several foliage pouches for as follows:

One pouch to hold 2 ten round AICS magazines.

One pouch to hold 2 five round AICS magazines.

One padded pouch to hold a Kestrel 4000NV.

One padded pouch to hold a Leica CRF 1200 rangefinder.

Mag pouches should have fold over closures that secure with a buckle. The two padded pouches can be either zipper pouches or fold over closures with buckles.

I need all of the pouches above in foliage green. I will provide specific measurements to the maker if anyone is interested. Thanks.

Joe
Requests: 1) blaze orange Nalgene bottle koozie, I'd like it to be slim, lightly insulated and just a plain design to absorb sweat from cold drinks, and keep them cold for a bit longer.
2) blaze orange Howard Leight impact sport headband cover, thin padding on the bottom in whatever color. Nothing fancy, just the cover that closes with Velcro.

PM or email me: lecherojr@yahoo.com I you can do this for me
3 requests:

#1: Replace zippers on my Condor Nalgene bottle pouch.

#2: Custom Admin pouch. I want a basic admin pouch with front flap clousure and loop material on the front like my Eagle admin pouch. Added to that a zippered compartment added to the back so that that part opens clam shell style. A few loops inside so i can run elastic cord and configur it to my needs. Pouch would still be slim and only gain in thickness about the amount of the zipper.

#3: pouch for the small 9 volt strobes (ie: Phoenix Jr.) This I will need to draw out to explain my concept

PM me if you are interested.
Request: NYLON simplified version of South African pattern 70 suspenders.

looking for some assistance in making a set of LBE suspenders modeled after the South African Pattern 70 web gear version, albeit in a more simplified form. Made entirely from nylon with 1 inch webbing, either 2.5 or 3 inch webbing, 4 plastic tri-glides, and 2 plastic D rings. In OD green or ranger green color.

WITHOUT the extra kit roll strops on the back of the shoulders or the "V" attachments on the front for belt attachment. and WITHOUT the extra D rings on the back or toward the top of the shoulders.

Attached is a picture of an original South African P70 suspenders for design reference.

I envision the upper shoulder portion made of wide webbing, doubled over n thickness, with 1" webbing as the "arms"(?) of the suspenders - dual parallel, in the rear and L&R front. Those would secure to the belt kit by wrapping the web around the belt and then back through a triglide.
On the Left and right front of the shoulder straps would be dual 1" horizontal straps vicinity of the clavicle area and with D rings at the transition from wide to narrow webbing to allow small pouch attachments. Sort of like on the old M1956 US suspenders but with a dual web as a nod to MOLLE pouch attachment

Is this something with which you can assist? If so, please let me know & I'll draw up a better concept sketch/ more defined pattern, scan it to you. I believe the design in my head is pretty simple and may not take much time to actually fabricate.

My idea is based mostly on the thought that by maintaining the design solely out of webbing without padding in the shoulders, will allow padded rucksacks straps to be carried a bit more comfortably.

Send me a PM and we can start discussing the details.

--------------------------------------------------------------------

  • One Man's Fatwa is another Man's FRAGO. 
  • Two to the Heart, One to the Mind.
  • In Spiritu Et Veritate, Ad Logica Animo, Ad Hominem, Ad Captandum Vulgus.
  • BEHOLD, the LORD my GOD, who prepares my Hands for Battle and my Fingers for War! PSALMS 144:1

Attachments

Photos (1)
Im looking for someone to modify a set of Blue Force Gear multicam SOC-C suspenders and an ATS multicam War belt sleeve.

I need someone to add some extra adjustable length straps to the front and rear of the BFG suspenders and the coresponding attachment points on an ATS belt sleeve.

This is going to be a setup for humping 5.56 and 7.62 link and will be worn both slick and under armor (hence why i am using susependers with minimal padding. I prefer everything to be in multicam.

basically turning these...


into this...


If you can swing this and dont have a 2 year backlog shoot me a PM please.

"Stay angry my friends"-the most dangerous man in the world.

 

"All hat, not much cowboy" Big Sky Brewing Co.

 

" I am Godzilla, YOU are Japan" -Critical Bill

SORD will make that rig pictured in auscam, in multicam. Multicam is now the new standard issue uniform and heaps of gear is slowly becoming available in MC.

You will probably need only to wait a couple of weeks.

And production run items will always be cheaper than custom designed gear

-------------------------------- Freedom - Isn't Free My only worry about death is that my wife will sell my gear for what I SAID I paid for it..... My greatest worry about life - is that she'll find out what I did pay for it.....

quote:
SORD will make that rig pictured in auscam, in multicam. Multicam is now the new standard issue uniform and heaps of gear is slowly becoming available in MC.

You will probably need only to wait a couple of weeks.

And production run items will always be cheaper than custom designed gear

Yeah i already have the items pictured above and the SORD rig is not what i want to wear under or over armor due to the padding in the straps, or pay for international shipping but thanks.

"Stay angry my friends"-the most dangerous man in the world.

 

"All hat, not much cowboy" Big Sky Brewing Co.

 

" I am Godzilla, YOU are Japan" -Critical Bill

I'm looking for someone (or some people) to make one or both of the following:

Snap or buckle based beltkeepers, (4) total, connecting a 1.5" inner belt to a 1.5" Jones Tactical belt.

Musette style shoulder bag. Detailed designwork available.

Jules

REQUEST:

I need 2 pack covers, made from Lightweight Ripstop nylon. 1 side being Blaze or International Orange, and the other Tan (Coyote, something sandy dirty) that can be cinched on by a simple drawcord and cordlock. Would prefer an attached stuffsack on them also, and a tie down point.

They will serve double duty in my current work environment.

1 Sized for a Cobra Pack, and one sized for a 3500 Cu In Pack.

I can send dimensions of the larger pack if needed.

Standing by.......................
REQUEST:

Don't laugh at me, but I'm looking for an apron in multicam. Ripstop would probably be fine, but heavier is okay.

____________________________ I'm not here to pass judgement. I'm here to point and laugh.

REQUEST:

I would like to get a claymore pouch made in cadpat TW
i can chase down the material to make it.

We're not the public service of Canada, we're not just another department. We are the Canadian Forces, and our job is to be able to kill people. - Jul 2005 - Gen Hillier, Chief of the Defence Staff

roger have, but looking for something made more ala supply captain molle claymore pouch.

We're not the public service of Canada, we're not just another department. We are the Canadian Forces, and our job is to be able to kill people. - Jul 2005 - Gen Hillier, Chief of the Defence Staff

Request:

Looking for a padded external pouch to carry a Marlin Papoose .22 scoped, 5 magazines, and a rimfire suppressor.

Here is a link to the Marlin Papoose.

Would like a tube style pouch with the magazine and suppressor pouches external.

*************************************** Then I heard the voice of the Lord saying, "Whom shall I send? And who will go for us?" And I said, "Here am I. Send me!"

REQUEST:

I'm looking for 4 vest carriers. They'd be more or less copies of an existing Irish police issue but of better quality materials & with a couple of extra pockets.

Vests can be shipped to my station, tracing of the panels & an example of the current carrier will be sent as a guideline on style & colour. Payment by Pay Pal.

Any help?

 

Remember Limerick, and Saxon perfidy!

Easy one. I bought some Tactical Tailor triple M4 shingles that I would like to have turned into single shingles (1=3).

______________________________________ http://www.youtube.com/user/ghettoblaster76 "Oooh dude...." -Anymous F16 Pilot's BDA after dropping two bombs on a mob of insurgents "The problem is that Jihad is like a box of chocolates, you never know who you are going up against..." -basicload

quote:
Originally posted by D1STBD:
So your going to sacrifice a triple for a single? You would be able to get 2 singles out of a triple because of the extra material needed for seam allowance.


I was hoping to get three out of one, however I am aware that the middle might need to be sacraficed. I'm ok with that though. These are TT MARPAT triples and the singles are unavailable. So be it.

These are going on a CIRAS and I only have 8 channels available so it will fit 4 shingles across. The triples screw things up. Sadly I'm a MARPAT junkie and want it to be symetrical and match.

I've had mismatched gear for a decade and just this once I wanted something to look good.

______________________________________ http://www.youtube.com/user/ghettoblaster76 "Oooh dude...." -Anymous F16 Pilot's BDA after dropping two bombs on a mob of insurgents "The problem is that Jihad is like a box of chocolates, you never know who you are going up against..." -basicload

Hello.

As per the "CSM" thread,I would like to have someone re-do the waist strap of 2 waist packs to modify them like the Emdom waist pack strap is,which is MUCH longer/adjustable, and are removable,allowing,for me,somewhat easy replacement.

Have 1 Coyote,& 1 black;the waist straps are currently 1.5,would like them as Emdoms are,1". The damn things also come unadjusted when the wind blows,and this would allow me to get the new wavelock buckle once finished,or,if you have them,I will of course pay you to throw 'em on.

Anyone? Please PM if able to do this for me.

Thank You.
quote:
Originally posted by crazypaulie:
Anyone want to sew an LBT radio pouch (non-molle) into a Mayflower cummerbund? --no longer needed!

Maybe also shorten a Mayflower H-harness?


update:

still need the h-harness shortened! also need male buckles added and new waist strap. PM for pictures and offers!

----

 

Ditch Medic

Joined: October 2009

Location: Washington State

I would like someone to add black MOLLE webbing in select locations to a black Eagle Industries AIII. The person doing the work would have to supply the MOLLE webbing. PM me if you're interested in helping.

Plus ça change, plus c'est la même chose.

 

老僧三十年前未參禪時、見山是山、見水是水、及至後夾親見知識、有箇入處、見山不是山、見水不是水、而今得箇體歇處、依然見山秪是山、見水秪是水。


Joined: 2008-07-16

This is possibly the tiniest request ever. Literally.

I'm looking for a MOLLE-compatible pouch, in Multicam, ACU, green (of any shade), or tan (of any shade) to hold some ear protection in.

After losing the damn issued earplug case for the umpteenth time, I'm looking for a good replacement.

Criteria:
-Fits on one Molle row.
-Holds Army-issue earpro case (the brown one) or has a kydex insert to prevent crushing. I can provide dimensions on request.
-Velcro flap to close.

Yeah, this is really tiny, but our SOP dictates earpro on the outside of the gear and I need a non-shitty way to hold it. Haven't found a suitable pouch yet either.

"We the willing, led by the unknowing, are doing the impossible for the ungrateful."

I'm thinking of a cover for an Ace Skeleton stock. Actually two covers, one for the bottom arm and one for the top. I'd like them to be Multi Cam Condura with velcro. I can provide a paper template cut to the exact diminsions desired if that would be helpful.

I'd like to talk the idea over with someone more knowledgeable than me... which doesn't narrow it down much. If anyone would consider this, shoot me a message and I'll give you a call.

Don't damage my calm -- (inspired by Haji)

I hope this is the right place for this. Is there anyone in the DC area that can repair a damaged plate carrier? This is for a Wounded Warrior who's training to get back into the fight. This is NOT a request for charity, he intends to pay fair market price. He would prefer to do it locally if it'll be fixed faster vs. returning it to the manufacturer.

Thanks,

Dave

 

Bacon is meat candy

 

Joined: 12/03/03      Location: The American side of the Potomac

I am looking for help on a project intended for my Spartan bag. I have what looks like a POK HBC. No divider or anything like that. Open up the zipper all the way and it is velcro from ear to ear.

What I am looking to do is secure a panel that will create a "false front". Secure it to the bottom velcro/PALS and on the top be L shaped with maybe a velcro strap(s) to keep it from flopping open.

I looked into Downrange Gear, but for some reason the page wont load and neither will my mail to him. Dunno why, may just be temporary....

Anyways, I am looking for a kydex sheet covered in Velcro PALS on BOTH sides. I have NOT taken measurements yet, figured I would wait to see if someone was interested in doing this. But, if I can answer any questions or you need further clarification, drop me a PM here or email at kaidorsai@hot.rr.com

Thanks for considering my request.

If a person goes through enough shit eventually they say: "NO FUCKING MORE!" Then they pick up a sword.

quote:
Originally posted by PlasticMag:
This is possibly the tiniest request ever. Literally.

I'm looking for a MOLLE-compatible pouch, in Multicam, ACU, green (of any shade), or tan (of any shade) to hold some ear protection in.

After losing the damn issued earplug case for the umpteenth time, I'm looking for a good replacement.

Criteria:
-Fits on one Molle row.
-Holds Army-issue earpro case (the brown one) or has a kydex insert to prevent crushing. I can provide dimensions on request.
-Velcro flap to close.

Yeah, this is really tiny, but our SOP dictates earpro on the outside of the gear and I need a non-shitty way to hold it. Haven't found a suitable pouch yet either.


May be a bit big for your tastes, but the BFG Boo Boo pouch sounds like it might work.

BFG Boo Boo Pouch

I have one, and it really is an unobtrusive little bastard.

 

----

"The thing everyone forgets about the Chinese is that they work on a 50-100 year master plan. Our best planning here goes out maybe a year or two."

I like it, but it's a bit too large I'm afraid. I really was looking for something miniscule, and it looks like I'm sorted. I appreciate the offers of assistance. My request has been taken care of. Smile

"We the willing, led by the unknowing, are doing the impossible for the ungrateful."

Cool. Make sure to post pics when you get it; I might be in the market for something like that myself!

 

----

"The thing everyone forgets about the Chinese is that they work on a 50-100 year master plan. Our best planning here goes out maybe a year or two."

I'm looking for an improved pouch for a CSEL radio. I'd like it to be ACU pattern and if possible made out of an FR material like the rest of the ALSE pouches. Also, I want two retention systems on it, preferably a strap with a buckle and a backup of velcro or a snap button. Let me know if you want a sketch showing what I'm talking about or need dimensions.

Even modifying one of the issued pouches will be fine, I just want something that will hold my radio more securely than a single snap.

Thanks!

------------------------------

"Trust me, I'm a medic"

 

"...by the heavens in which men fly."

Need my eagle hydration pack shortened and some other straps removed. I need it to set flush with the bottom of my armor carrier. Which is right below.So both the actual carrier and straps need to be shortned. There will also need to be the buttons from the straps reloacted. Needs to have a grommet hole in the bottom. Seems like it shouldnt be overly complicated for someone to do.

Pics below










Need two of these removed

and four of these removed



Thanks,
Mike
Here goes nothing, I know this might be gay and there may be four or five packs out there that are close but this is what I'm looking to have made. Also I have been up for a good while so pardon if anything doesn't make sense.

I am looking for a smallish (relative to my fat ass)pack made out of Grey or Foliage 500D.

-Stowaway Straps with sturnum strap w/ fast-ex buckles on shoulder straps.
-Unpadded with the mesh like the Blue Force gear straps on the upper area.
-Back Panel in the same mesh that the straps hide/stow behind.

-Slick Outside of pack except for patch of loop on upper front panel.
-Full open zipper main compartment
-Main Compartment Lined with pals.
-Small Chamber mesh type pocket on inside top.
-Reinforced Handle "seat-belt" material running down behind the mesh back and up the front (hidden on front panel?)
-front zipper panel pocket if its two layers.
-Small loops to add buckles to attach it to pals on a vest.
I don't care what color interior is as long as outside is greyish color. Would prefer a charcoal grey but I'm not that obsessed with it.

Overall dimensions.
20-22" tall
8 columns of pals (interior) wide.
4.5-6 inches thick.

So Basically take a Cobra Pack, E&E Pack from Eagle and a Kifaru E&E and melt them into one.

Now tell me it can't be done or that it will cost me more then the three mentioned combined...

Thanks for your time guys.
PM or Email Krazykiddjoe AT gmail.com with any questions or quotes.

KKJ- going to bed after the night shift.

----------------------------

IT IS WHAT IT IS- The Motto of the street cop.

Add Reply

Likes (1)
MOJONIXON
Post
Copyright Lightfighter Tactical Forum 2002-2019
×
×
×
×
×