Starting around 10 years ago, as I starting getting officially old, and injuring myself more than trivially, I had some good conversations with PTs, read what all you guys said, and so on, and have changed up my footwear. It's mostly good, but... laces. 

I hate laces. Now, I like snug shoes so I'm not a slip-on guy or anything, but the time to lace up, the chances of un-tying, need to adjust partway through the day/run/ruck because laces stretch, etc. just always annoyed me. For decades now. 

So, I went through a series of options, and for a bit got into a couple styles of the elastic laces. But then I got a pair of Topos with the cables, and the windlass system. It... was damned good. 

 

(not these, but this sort of thing) 

But, it comes only on installed on shoes, the windlass thing is ugly, clanky, and sometimes snagged and released. But I loved the idea, so poked around and just as I was about to leave for my big trip last year, I stumbled across these while waiting for the wife to finish trying on stuff in REI. 

Salomon Quicklace Kit Lace System

They are officially replacement laces for some specific series of Solomon shoes and ski boots. But, they are really just funny, tiny, non-stretch laces with a retention toggle thingy. No idea what they are made of, but it's not steel cable or anything. Something synthetic, not especially hard to cut, and easily melted (when I have to de-fray cut ends). 

But, it's perfectly performing so my favorite system. If I can get longer ones, I am gonna try them on my boots. They basic thing is that they are pretty slippery, so there's none of that normal lace thing where they bind up and you have to put your finger in and loosen or tighten down the lace route. Shoes go on easy, come off easy, and are more comfy as the total lace tension is distributed evenly. 

No stretch so they never need to be adjusted en route. 

And, they are apparently not prone to wear. My previous ST2s are totally worn out, so I got a new pair, and put new laces on them. But the old ones, and the hardware, look new.

The installation is one-way and/or destructive so no way to disassemble and re-use them. Luckily, pretty cheap. I bought these off eBay, for $12. Compared to the price of shoes, not bad. 

https://www.ebay.com/itm/Salom...p2057872.m2749.l2649

Lace like normal. Due to fraying, as much thicker as it is, I just keep the end loops on during lacing

Once the lacing is done, get the retention toggle bits. You need to assemble it. 

The box is slot side up, thread both laces through and align one to each side.

Stick the gear-looking-thing inside, wider part down. 

Then you clip the top bit on. It's not super easy to describe, but the wings are a spring, and face forward, the nub locks into the gear thing. 

This allows you to grab the toggle and pull forward pretty naturally, and it loosens.  

Anyway, then, cut the laces to the length needed to give you enough to loosen. You can use it like this, so try it before cutting. 

Once you cut, thread through the end lock thingy and tie a knot in each side.

Make it as small as possible, as there's not much room. Probably good to trim the remaining cord after the knot also.

Stuff the two together. I need to use pliers to get them to lock, but you may have the hand strength to do it without tools. 

If your shoes have a "lace garage" at the top of the tongue, this is supposed to be rolled up around the end barrel thing, then tucked in.

I just stick it into the last loose lace cross, and it's pretty secure for my purposes. 

The things that will destroy America are prosperity at any price, peace at any price, safety first instead of duty first, the love of soft living and the get rich quick theory of life. – Theodore Roosevelt

 

Joined: 19NOV2004   Location: Mission, Kansas

Original Post

The first thing I do when I get new boots or hiking shoes is replace the laces with 550 cord. I don't remove the inner strands. I use shrink tubing on the ends for added durability.  Never had issues with stretching or breaking. 

 

On my hiking boots I use more cord than really necessary.  If I have an odd need for cordage while out in the woods, I can cut them down to the  minimal necessary amount just to keep the boot from slipping off my feet, the rest gives me a small amount of free cordage  

----------------------------

"Do not suppose that I have come to bring peace to the earth. I did not come to bring peace, but a sword."


Friends, in your life I hope you do four things; lie, steal, cheat, and drink. When you lie,do it to save a friend. When you steal, steal someone's heart. When you cheat, cheat death. And when you drink, drink with me.

Joined 06/02/09.        Sierra Nevadas, Ca.

pira114 posted:

The first thing I do when I get new boots or hiking shoes is replace the laces with 550 cord....

 Same here.

Only, I do it to ALL of my laced footwear, to include running shoes and sneakers.

                                                                                             ____________________________________________________________

                                   

                                                                                              "Hokey religions and ancient weapons are no match

                                                                                                 for a good blaster at your side."        -Cpt. Han Solo

                                                                                            ____________________________________________________________

 

Joined: 3/20/05 4:14 PM        Location:  North Carolina

Yup, I also do paracord laces. Tried the latest iteration of Danner laces and they did the usual fraying. Not sure why shoelaces are so poor. 

I did an experiment with the last boots, and had one gutted, one not. No perceptible difference in comfort, speed of drying, anything. And I never broke either one. 

 

I also did these: 

pre-"knotted" elastic laces, and the wife loves them, so has all my old ones.  We settled on the Xtenex ones. They may be a better solution if you need to keep different parts of the shoe at different tensions, and you can generally set them up to not tie or untie; you just get the tension adjusted right, then knot them, and use the elastic to slip them on and off. 

The things that will destroy America are prosperity at any price, peace at any price, safety first instead of duty first, the love of soft living and the get rich quick theory of life. – Theodore Roosevelt

 

Joined: 19NOV2004   Location: Mission, Kansas

Lock laces are also very popular with the thru-hiking crowd. They make different versions for everything from regular sneakers up to camo boot laces. The company website usually has a 20% off coupon for your first order if you give them an email address. I'm sure everyone knows how to make that work. 

Locklaces Website

I've always just used waxed laces.  They've worked for me until they get too unwaxy, which is when you need to start double knotting them to keep them from coming untied altogether.  Soon after that annoyance it's time to replace.  It's about that time on my newish  Danner Kinetics now.

Mojo/Mark
__________________________
Yo homey, is that my briefcase...?
Vincent from "Collateral"
__________________________
You want the good life, you break your back, you snap your fingers, you snap your neck... Prong/Demon Hunter
__________________________

That's one... 


Joined: 9/30/09
Location: Northern Nevada (Reno/Sparks)

Add Reply

Likes (4)
Post
Copyright Lightfighter Tactical Forum 2002-2019
×
×
×
×
×