Hi everyone, 

I've been reading for a couple of weeks now on plate carriers and armor. I've decided to go with the CRYE JPC 2.0 in size XL, I'm a big guy. I'll be purchasing a SAPI cut plate in size 11"x14". I've looked at so many different rifle plates my head was spinning, but I've narrowed it down to a couple different options. It's very confusing trying to determine the various threat levels and the information in this forum has been incredible. The post from Doug Deaton was especially helpful. 

This is for work in the CONUS. For security, I'll keep my location private, but this is in a very large metropolitan area. 

I am looking specifically at the HESCO 3810 and the U210 right now, but would consider other options if it makes sense. There is a lot to like about the U210, but the 3810 looks like it can stop the 7.62x54R which I assume, maybe incorrectly, that it can also stop .308?

The U210 also has the M855/A1 listed as a round it can defeat, but it's not listed for the 3810. This is where things get confusing for me, does it mean that because it is not listed, it cannot defeat that round (referring to the attachment below)?

I found a great HESCO PDF that lists all of the armor, link here: ttp://s000.tinyupload.com/?file_id=00256455976922644122

I know my purchase is dependant on the types of threats I could face, but I do not know exactly what those could be and could use the help of people on this forum to make my decision. This is a real exercise and I'll be spending a lot of money to make the purchase and your advise would be greatly appreciated. 

Thank you

Original Post

It's been suggested before, but buy plates first then choose a carrier. 

As for determining your probable threats - what calibers is your department seizing in the field or not? 

If a specific caliber &/or load isn't listed, identified then it probably was not officially tested. Now that doesn't mean no one has shot that round at that plate just that it wasn't done officially. 

Have you reached out to a competent Hesco dealer, run your situation & needs past them, and gotten their recommendation? More than once over the years, I've gotten on the phone with reps from US Armor, Point Blank, Armored Mobility, and AT Armor.

Erick posted:

It's been suggested before, but buy plates first then choose a carrier. 

As for determining your probable threats - what calibers is your department seizing in the field or not? 

If a specific caliber &/or load isn't listed, identified then it probably was not officially tested. Now that doesn't mean no one has shot that round at that plate just that it wasn't done officially. 

Have you reached out to a competent Hesco dealer, run your situation & needs past them, and gotten their recommendation? More than once over the years, I've gotten on the phone with reps from US Armor, Point Blank, Armored Mobility, and AT Armor.

I have reached out to a dealer and they have been very helpful. They recommend the 3810 if 7.62x51 is a threat in my area, but I've never really come across it nor have others I work with. I'm very new to purchasing rifle plates so I don't want my ignorance steering me in the wrong direction. I like the idea of having 7.62x51 protection; however, maybe it's not a significant threat and I should be looking at the U210 for the weight savings and how thin it is. 

I'm hoping someone with some experience that has been involved in large department purchases either on the decision making end, or receiving end, help push me in one direction. I figure it's either go with the U210 which is a fantastic plate with solid threat protection, lighter and thinner. Or go with the 3810 because it has the additional threat protection, but thicker and heavier. 

About a year ago, I bought a set of Hesco L210's.  I went through the guys at AT Armor and they were very helpful in talking though my needs and desires vs. pros and cons of some of their products.  I do not wear the plates daily so others can chime in there.  When deployed, I wore the plates/vest I was issued and eventually you get used to what you have.  In a way, that's less hassle then having a choice in the matter  In the end, you'll need to rank your priorities (protection, weight, cost, etc) and make your pick from there.  Again, the reps from most reputable dealers should be able to guide you once you have your priorities in mind.

"These are the rules. Everybody fights, nobody quits. If you don't do your job I'll kill you myself."

 

Joined: 04/01/2004     Location:  Twin Cities, MN

Honestly, shoot Mike at AT Armor a call or an email. He has no problem walking you through your best choice and correct sizing for the plate. He doesn't try to upsell you, he legit is trying to get you the correct armor for your needs.

--------------------------------------

Joined: 9/1/12

Another happy AT armor customer.  What will you be doing while wearing the plates?  Is this for a low vis rig in a high risk area or for a class rig/civil unrest rig?  Your choice of a JPC seems to be towards the overt.  If you are going "loud" , I'd look towards the 3810 as the slight reduction in thickness provided by the U210 (which makes it easier to hide, among other things) is offset by the fact that you have it in a visible military style carrier. 

___________________________________________________________________

I'm either dead right, or horribly wrong. Either way the results should be entertaining.

 

"Shoot the MOTHERF$%^ER until he changes shape or catches fire"  the PAT ROGERS

Add Reply

Post
Copyright Lightfighter Tactical Forum 2002-2019
×
×
×
×
×