My work, Fallbrook Forge

I started making knives recently, I'm working towards getting a full shop setup and hope to go full time with this venture. So far it's slow, getting work done when I can after work and weekends, saving for better equipment. But I love this stuff! 

I've been focusing on outdoor knives mostly so far, but plan to offer "tactical" versions as well. I'll be doing some wrapped, 550 cord, terro tuff and micarta with flared titanium tubes soonish. 

Take a look please! Any questions feel free to ask here or through PMs. 

 

Original Post

Nice!  Have you also considered making custom sheaths, new handles on old knives, etc.?  That kind of stuff can take skills and equipment that most of us don't have.

-------------------------

Mark

Swear allegiance to the flag Whatever flag they offer

Never hint at what you really feel

Teach the children quietly For some day sons and daughters

Will rise up and fight while we stood still

 

Joined:  2/24/2003                          Location:  Nevada, USA

Really liking the top pic and the fourth one down. Reminiscent of a Scandi blade. I could find a use for something like that in about a 4.5” to 5” blade length with a deeper finger choil and G-10 or micarta scales. 

Mojo/Mark
__________________________
Yo homey, is that my briefcase...?
Vincent from "Collateral"
__________________________
You want the good life, you break your back, you snap your fingers, you snap your neck... Prong/Demon Hunter
__________________________

Because...I Can. 


Joined: 9/30/09
Location: Northern Nevada (Reno/Sparks)

MOJONIXON posted:

Really liking the top pic and the fourth one down. Reminiscent of a Scandi blade. I could find a use for something like that in about a 4.5” to 5” blade length with a deeper finger choil and G-10 or micarta scales. 

Thank you! Those are different pictures of the same knife, it’s scandi ground 1084. That particular model I’m calling the SR-25 and has been very well received. I plan on making more of them in my next batch of knives! 

Liking that top knife - what are the specs on it?

 

-----------------------------------------------------------------------------------

I've been falling so long it's like gravity's gone & I'm just floating...

Cool, especially the stubby bushcraft designs with lots of belly. 

The style doesn't get the love it deserves and takes a back seat to stuff with sexier proportions....but, when  it's dark and cold, you're looking like the Michelin man with a headlamp, your hands are numb despite some ridiculous mitts, and you just need to carve a damn stick, it's the right tool.

Good luck on your journey.

 

senorlechero posted:
MOJONIXON posted:

Really liking the top pic and the fourth one down. Reminiscent of a Scandi blade. I could find a use for something like that in about a 4.5” to 5” blade length with a deeper finger choil and G-10 or micarta scales. 

Thank you! Those are different pictures of the same knife, it’s scandi ground 1084. That particular model I’m calling the SR-25 and has been very well received. I plan on making more of them in my next batch of knives! 

PM inbound to you, brother. 

Mojo/Mark
__________________________
Yo homey, is that my briefcase...?
Vincent from "Collateral"
__________________________
You want the good life, you break your back, you snap your fingers, you snap your neck... Prong/Demon Hunter
__________________________

Because...I Can. 


Joined: 9/30/09
Location: Northern Nevada (Reno/Sparks)

I have some knowledge, I have some skills,  I have damn few crafts!  

Looks like you are developing yours.  All the best, beautiful work.  Best of luck. 

-----------------------------------------------------------------------

“Speak softly and carry a big stick;  you will go far. “

 Theodore Roosevelt

-----------------------------------------------------------------------

 

Joined: 29 May 2008          Location: AZ

Thank you all for the kind words! 

@Halfneck that one's 4" blade 1/8" 1084  at 61RC from Peters Heat Treating, 4 1/4" handle with vintage canvas micarta, natural canvas pin and lanyard hole. .090 tan Boltaron(more heat resistant kydex) with eyelets spaced for a bunch of options, includes the 550 for belt loops. 

That particular one was a zero degree scandi 

Nice. I got a custom Jones Bros puukko in 1084 that has been a great knife. Peters does a good heat treat too.

-----------------------------------------------------------------------------------

I've been falling so long it's like gravity's gone & I'm just floating...

Mmmm... stabby...

“One sometimes gets the impression that the mere words ‘Socialism’ and ‘Communism’ draw towards them with magnetic force every fruit-juice drinker, nudist, sandal-wearer, sex-maniac, Quaker, ‘Nature Cure’ quack, pacifist, and feminist in England,”  -George Orwell-

Heat treating is one of the more difficult things to perfect though it seems like it should be fairly simple.

When you find someone who has worked out the voodoo and has a track record of consistency- you get out of their way and let them perform their art.

PARTICULARLY if you are trying to do things on a commercial level. 

Most knife guys are kinda like most of the members here... very picky, very bitchy, very experienced, very picky, and slightly OCD... did I mention picky?

It doesn't matter if DaVinci, Michelangelo or Hephaestus himself did the forge work if the heat treating is bad.

Everything that I have seen from Peters heat treating either on the web or in print has been good.

David

------------------------------------- "A True Warrior knows neither Left or Right"  Looking for a doc who can fix my allergies.. Stupid People and IED's...

Very nice indeed.  Must be great to have the talent to do that.  Mine is most limited to mixing drinks and making sauces.

I'll be sure to get something from you as soon as my American Kami order comes in.  Which should be any day now.  Yep.  Any day.🤣

-------------------------

IT'S A COLT.  THEY'RE LIKE THE HK OF GUNS.

HRH (Ret.) The Most Reverend Consig

All Hail King Smoothie!

 

 

 

 

 Joined: 28 Nov 2004: 0037hrs        Location: The worst run state in the U.S

These big bellied bastards in pic 5 & 8 make me tingle in my no-no place.

---------------------------------- 'My lot in life is to serve, to the best of my ability. To know my life was not a waste, that in the end I can look back from the gates and know I did my best and that it was enough"

I just wandered back to LF after a few years away to look at the blade forum to see if any members were making knives. I started making a few here and there about two years ago. That knife in that first pic is absolutely killer looking! I really like the no handle pins look and the geometry of that blade! And the handle in the second pic... beautiful!

What grinder are you using and are you using a heat treat oven or heating in forge?

C Walley posted:

All of your knives look great!  I really like the knife in the first picture, and in the seventh picture.  Are you taking orders at this time?  Are the sheaths included? 

Thank you! That' the SR-25, it's good for precision and some mass mayhem if needed. I can take a limited amount of orders currently, and I include a sheath of kydex or leather. I will exclude a sheath if you have someone you like to send knives to.

Consigliere posted:

Very nice indeed.  Must be great to have the talent to do that.  Mine is most limited to mixing drinks and making sauces.

I'll be sure to get something from you as soon as my American Kami order comes in.  Which should be any day now.  Yep.  Any day.🤣

Thanks! I really like the sound of your talents! You can come over and practice your talents while I make you a knife! Though depending on the cocktails the knife making might get delayed! 

So sorry about that situation, it always sucks to hear those and they seem so prevalent with knifemakers. I'm purposely limiting what I'll take on to avoid those things. 

Truckie posted:

These big bellied bastards in pic 5 & 8 make me tingle in my no-no place.

Thanks? I think... Did I wander into the Team Room?  That ones the M4, good for all around and can be configured for specific purposes.  It's my favorite so far, with the Osage Orange handled one being my current user. 

yellowlab03 posted:

I just wandered back to LF after a few years away to look at the blade forum to see if any members were making knives. I started making a few here and there about two years ago. That knife in that first pic is absolutely killer looking! I really like the no handle pins look and the geometry of that blade! And the handle in the second pic... beautiful!

What grinder are you using and are you using a heat treat oven or heating in forge?

Very Cool! And thank you! It had been something I always thought would be cool, as a kid I wanted to do it, and I always put it off, "its too expensive, too many tools, I don't know how" etc etc etc. Then when I got out I said fuck it and went to one of the ABS intro to bladesmithing courses and absolutely fell in love! And then said "Fuck it! I can do this shit with hand tools!" 

I'm currently using files and sandpaper, I have heat treated a few in the forge for my own evaluation, everything you see here was heat treated by Peters or Jeff Mutz/Tru Grit 

Thank you all so much for the kind words! 

I have some ideas for hard use field knives of the tactical nature bouncing around, if anyone has a feature or design or material they would think would be a good fit on a LFer knife let me know! 

 

That is killer! That is what I have been doing for a few years now, file and jig. I am picking up a 2x72 next month though so that should hopefully take my knives to the next level. I do all of my own heat treating in my forge, but it is a painful learning curve after you crack a few.

Add Reply

Likes (12)
2damnold4thisBattle Monkeystray roundfpdsniperCCCSDfiremission4mortarsHussarGLOCK10MMTheTickXTCBXMOJONIXONDorsai
Copyright Lightfighter Tactical Forum 2002-2019
×
×
×
×
×